Jaw Stone Crusher

jaw stone crusher
  • Вместимость: 1-1000т/ч
  • Размер подачи: 120-1200мм
  • Размер разряда: 10-400мм
  • Применимые материалы: камень, железная руда, известняк, кварцевый камень, речная галька, гранит, базальт, строительные отходы, и т.д.
  • Заявление: Widely used in mineral processing, каменный уголь, строительные материалы, химическая промышленность, металлургия, цемент, стекло, керамика, плавка, и другие отрасли.
Получить предложение

Advantages of Jaw Stone Crusher

The crushing cavity is deep and there is no dead corner area, the production efficiency is high, коэффициент дробления большой, the product size is uniform, и энергопотребление низкое.

Widely discharge opening & widely adjustment range, which can meet your different needs.

Структура проста, the work is reliable, the operating cost is low, and the lubrication system is safe and reliable.

The jaw stone crusher has low noise, меньше пыли, and an obvious energy-saving effect during operation.

Application of Jaw Stone Crusher

Stone is a very important industrial raw material in modern industry.

In order to better meet the requirements of production, it is necessary to crush the stone into particles.

Jaw stone crusher is a machine specially used for crushing and processing stones.

It can crush and process various stone materials with a compressive strength of less than 320 MPa.

It has a large crushing ratio, uniform product size, простая структура, and reliable work.

It is widely used in the modern construction industry.

Granite
Talc
Basalt
River Pebble
Limestone
Calcite

Parameter of Primary Jaw Stone Crusher

Модель Размер порта подачи(мм) Максимальный размер подачи(мм) Диапазон регулировки выхода(мм) Вместимость(т/ч) Сила(кВт) Масса(т) Крупногабаритный(мм)
ПЭ150*250 150*250 125 10-40 1-3 5.5 0.8 720*660*850
ПЭ200*350 200*350 180 18-70 3-10 11 1.5 1000*870*990
ПЭ600*750 600*750 500 150-200 80-240 55 15.8 2070*2000*1920
ПЭ600*900 600*900 480 65-160 90-180 55-75 17 2290*2206*2370
PE830*1060 830*1060 650 160-220 150-360 110 30.7 2740*2430*2800
ПЭ900*1200 900*1200 750 95-165 220-450 110-132 58 3800*3166*3045
ПЭ1200*1500 1200*1500 1020 150-300 400-800 160-220 100 4200*3750*3820

Video of Jaw Stone Crusher

The jaw stone crusher is mainly composed of frame, эксцентриковый вал, large pulley, flywheel, movable jaw, боковая защитная пластина, toggle plate, toggle plate rear seat, clearance adjustment screw, return spring, fixed jaw plate, and movable jaw plate.

When it is working, it is powered by a motor, and the eccentric shaft is driven by a V-belt and a sheave to make the movable jaw move back and forth according to a predetermined trajectory.

The internal materials are crushed, and the finished materials are discharged through the lower discharge port. The working process of the whole broken stone is smooth and simple, and the principle is scientific.