Міксер для сухога раствора
- Instead of a traditional chain transmission device.
- extend using life more than 2-3 гадоў.
- Patented Sealed Design: Dust will never enter the bearing.
- Material is wear-resistant manganese steel.
- Cylinders control the host feeding door at the same time.
- Adopts the adjustable detachable design.
There Are 2 Types Dry Mortar Mixer For You Choose
Belt Dry Mortar Mixer Machine
Тып 1: Double Shaft Paddle Dry Mortar Mixer
- The dry mortar mixer has sufficient power and high mixing speed. The mixing time is 2-3 minutes per batch.
- High mixing uniformity, the uniformity of the material can reach 99.5%.
- Using paddle cross design, each paddle never fights, доўгі тэрмін службы.
- 360° No dead Angle.
- Even for materials with large differences in specific gravity, particle size, and shape, mixing does not produce segregation.
- Discharging mode is a big open door, discharging speed is fast.
- Material according to the material, choose carbon steel, stainless steel material.
The double shaft paddle dry mortar mixer machine working principle:
The dry mortar mixer is loaded with two blades rotating outwards at the same time.
Under the action of the drive device, the running track of the blades is intersecting and dislocated meshing.
| мадэль | WZH-2 | WZH-3 | WZH-4 | WZH-6 | WZH-10 |
|---|---|---|---|---|---|
| Power(квт) | 15 | 18.5 | 22 | 37 | 55 |
| Вага(кг) | 2300 | 2900 | 4800 | 6000 | 7800 |
| Maximum Fills(кг) | 600-1000 | 1000-1500 | 1200-2000 | 1800-3000 | 4000-6000 |
| Uniformity for material | больш чым 95% | больш чым 95% | больш чым 95% | больш чым 95% | больш чым 95% |
Dry Mortar Mixer Application
Dry Mortar Mixer In Лінія па вытворчасці сухога раствора
Dry Mortar Mixer In Завод сухіх раствораў
Dry Mortar Mixer In Small Машына для вытворчасці сухіх раствораў
Тып 2: Spiral Belt Dry Mortar Mixer Machine
- Simple operation, нізкі кошт, can quickly generate income.
- Adopt 3 layers bare belt mixer, mixing speed is fast.
- Wide range of use, can mix a variety of mortar.
- Small footprint, the output per hour up to 8T /h, 2-3 people operation.
- The operation is a low noise mixer.
- The dry mortar mixer is provided with an observation hole, cleaning hole, feeding port, unloading port, і гэтак далей.
- Dry mortar mixer machine equipped with electric control cabinet, automatic unloading, save time.
- The mixing time of the mixer machine is 5-8 хвілін, and the uniformity of the material can reach more than 95%.
- Cycloid needle reducer and motor directly connected reducer, fast speed, доўгі тэрмін службы.
- Both ends of the main machine are provided with sealing strips to prevent dust leakage.
The convective mixing of the three-layer spiral ribbon mixer can fully combine the materials and mix evenly within 5 хвілін.
| мадэль | LD500 | LD1000 | LD2000 | LD300 |
|---|---|---|---|---|
| Output(T/batch) | 0.5 | 1 | 2 | 3 |
| Mixing Time(per batch) | 3-5mins | 3-5mins | 3-5mins | 3-5mins |
| Магутнасць рухавіка(квт) | 5.5 | 7.5 | 11 | 15 |
| Rotate Speed(абаротаў у хвіліну) | 24 | 24 | 24 | 24 |
| Reducer | Cycloidal | Cycloidal | Gearbox | Gearbox |
| Вага(кг) | 1000 | 1300 | 2200 | 2400 |
| Floor Area Needed(㎡) | 2.52 | 3.63 | 4.38 | 6 |
Spiral Belt Dry Mortar Mixer Application
Dry Mortar Mixer With Valve Packing Machine
Dry Mortar Mixer In Tile Adhesive Making Machine
Dry Mortar Mixer In Small Wall Putty Manufacturing
Міксер для сухога раствора: Канчатковае кіраўніцтва з часта задаванымі пытаннямі
What kind of materials can be mixed in a dry mortar mixing machine?
Adhesive mortar, plaster mortar, insulation mortar, tile grout, waterproofing putty, decoration mortar and above materials can all be produced. If your mortar is special, please consult us.
How to mix mortar in a mixer?
The material is conveyed to the mixer through the feeding screw conveyor. Either a paddle mixer or screw belt mixer can be used. Press the start button to start the mixing as shown in the video.
If you want to mix lacquer, what kind of mixer to choose?
Only a professional lacquer mixer is needed, as shown in the picture below.
If you want to mix concrete, what kind of mixer do you choose?
The size of the concrete is relatively large, so a professional concrete mixer should be used. You can choose three blenders according to your needs.
JS Concrete Mixer
JZC Conrete Mixer
If you want to mix putty powder, what kind of mixer do you choose?
If you want to mix putty powder, you can choose a suitable dry mortar mixer according to your output.
If the output is 1-6t/h, we recommend you choose a screw mixer.
If the output is more than 8t/h, we recommend you choose a double-shaft paddle type dry mortar mixer machine
Paddle Dry Mortar Mixer
Ribbon Dry Mortar Mixer
How to choose the most suitable dry mortar mixing machine?
- Першы, identify your needs. How much output do you want to achieve in a day?
- Look at the dry mortar mixer configuration when choosing, because the higher the configuration, the more uniform the mixture will be.
- There are many models of dry mortar mixing machine: FU100, FU200, FU300, FU500, FU1000, FU2000, FU3000, FU5000, г.д. The output is 100kg/batch, 200kg/batch, 300kg/batch, 500kg/batch, 1000kg/batch, 2000kg/batch, 3000kg/batch, 5000kg/batch.
Problems needing attention during use a dry mortar mixer
Before using a dry mortar mixer, check whether bolts and nuts are loose, flat teeth, round teeth, and spindle nuts are loose. Turn the pulley by hand to check whether the machine is colliding.
The dry mix mortar machine rotation is flexible, whether there are sundries in the machine, boot idling for 3 хвілін, no abnormal phenomenon, can start operation.
When the dry mortar mixer machine is working, it is necessary to pay attention to the removal of sundries in the materials. Iron stones and other objects are strictly prohibited to enter the machine to avoid damage to the machine
Feeding should be uniform, pay attention to the load degree of power, to avoid choking.
Which dry mortar mixer manufacturer is the best?
We are located in the central region of China manufacturing industry, is one of the top 10 dry mortar mixer suppliers, with advanced equipment, first-class service team, 7*24h engineers online answers, if you have any needs, калі ласка, звяжыцеся з намі.